John Deere 5220 5320 5420 5520 Tractor Operation Manual
TM2049
John Deere 5220:
- Engine: The John Deere 5220 is equipped with a 4-cylinder turbocharged diesel engine.
- Horsepower: The rated engine horsepower for the John Deere 5220 is approximately 53 horsepower.
- Transmission: It features a 9-speed synchronized transmission for smooth gear shifting.
- PTO (Power Take-Off): The tractor has a rear PTO with a standard speed of 540 RPM.
- Hydraulics: The John Deere 5220 comes with a 3-point hitch system and a rear hydraulic lift capacity of around 1,680 kg (3,700 lbs).
- Weight: The approximate weight of the tractor is around 2,450 kg (5,400 lbs).
- Tire Size: The specific tire size can vary depending on the configuration and options chosen.
John Deere 5320:
- Engine: The John Deere 5320 is equipped with a 4-cylinder turbocharged diesel engine.
- Horsepower: The rated engine horsepower for the John Deere 5320 is approximately 64 horsepower.
- Transmission: It features a 9-speed synchronized transmission for smooth gear shifting.
- PTO (Power Take-Off): The tractor has a rear PTO with a standard speed of 540 RPM.
- Hydraulics: The John Deere 5320 comes with a 3-point hitch system and a rear hydraulic lift capacity of around 1,810 kg (4,000 lbs).
- Weight: The approximate weight of the tractor is around 2,590 kg (5,710 lbs).
- Tire Size: The specific tire size can vary depending on the configuration and options chosen.
John Deere 5420:
- Engine: The John Deere 5420 is equipped with a 4-cylinder turbocharged diesel engine.
- Horsepower: The rated engine horsepower for the John Deere 5420 is approximately 81 horsepower.
- Transmission: It features a 9-speed synchronized transmission for smooth gear shifting.
- PTO (Power Take-Off): The tractor has a rear PTO with a standard speed of 540 RPM.
- Hydraulics: The John Deere 5420 comes with a 3-point hitch system and a rear hydraulic lift capacity of around 2,720 kg (6,000 lbs).
- Weight: The approximate weight of the tractor is around 2,840 kg (6,270 lbs).
- Tire Size: The specific tire size can vary depending on the configuration and options chosen.
John Deere 5520:
- Engine: The John Deere 5520 is equipped with a 4-cylinder turbocharged diesel engine.
- Horsepower: The rated engine horsepower for the John Deere 5520 is approximately 89 horsepower.
- Transmission: It features a 9-speed synchronized transmission for smooth gear shifting.
- PTO (Power Take-Off): The tractor has a rear PTO with a standard speed of 540 RPM.
- Hydraulics: The John Deere 5520 comes with a 3-point hitch system and a rear hydraulic lift capacity of around 2,720 kg (6,000 lbs).
- Weight: The approximate weight of the tractor is around 2,880 kg (6,350 lbs).
- Tire Size: The specific tire size can vary depending on the configuration and options chosen.
Download Manual, This Complete Factory John Deere 5220 5320 5420 5520 Tractor Operation and Test Technical Manual TM2049 includes needed instructions to maintain and service your tractor using detailed diagrams and manufacturers specifications.
Deere 5220 5320 5420 5520 Tractor
Collection of 2 Manuals: John Deere 5220 5320 5420 5520 Tractor Repair Service Technical Manual TM2048 & Operation and Test Technical Manual TM2049
IMPROVED PDF MANUALS HAVE Bookmarks, Searchable Text, Index, and Improved Quality.
This collection contains the following products:
A- John Deere 5220 5320 5420 5520 Tractor Repair Service Technical Manual TM2048
B- John Deere 5220 5320 5420 5520 Tractor Operation & Test Technical Manual TM2049
CONTENTS
SECTION 10 – GENERAL INFORMATION
05 – Safety
10 – General Specifications
20 – Fuel and Lubricants
25 – Serial Number Locations
30 – Features and Accessories
SECTION 20 – ENGINE REPAIR
05 – Engine
10 – Cooling System
SECTION 30 – FUEL AND AIR REPAIR
05 – Fuel System
10 – Air Intake System
15 – Speed Control Linkage
SECTION 40 – ELECTRICAL REPAIR
05 – Battery, Starter, and Alternator
10 – Electrical System Components
15 – Wiring Harness
SECTION 50 – POWER TRAIN REPAIR
05 – Clutch Housing
10 – Clutch Assembly – Collar Shift/SyncShuttle Transmissions
11 – Clutch Assembly – PowrReverser Transmission
12 – PowrReverser
15 – CollarShift/SyncShuttle Transmission
16 – PowrReverser Transmission
20 – Rear PTO Drive Shaft
25 – Differential
30 – Final Drives
35 – Mechanical Front Wheel Drive
40 – Creeper Assembly
SECTION 60 – STEERING & BRAKE REPAIR
05 – Steering Repair
10 – Brake Repair
SECTION 70 – HYDRAULIC REPAIR
05 – Hydraulic Pump and Filter
06 – Hydraulic Oil Cooler
10 – Rockshaft
15 – Dual Selective Control Valve
16 – Single (Third) Selective Control Valve
20 – Hydraulic Mid Mount Coupler
25 – Hydraulic Power Beyond
SECTION 80 – MISCELLANEOUS REPAIR
05 – Front Axle – 2WD
10 – Wheels
15 – 3-Point Hitch
SECTION 90 – OPERATOR STATION REPAIR
05 – Seat and Support
06 – Control Console and Panel – Tractors Without Cab
10 – ROLL-GARD
15 – Cab Components
20 – Air Conditioning System
25 – Heating System
SECTION 210 – TEST & ADJUSTMENT SPECIFICATIONS/OPERATIONAL CHECKOUT PROCEDURES
05 – Test and Adjustment Specifications
10 – Operational Checkout Procedures
SECTION 220 – ENGINE OPERATION, TESTS & ADJUSTMENTS
05 – Component Location
10 – Theory of Operation
15 – Diagnosis, Tests, and Adjustments
SECTION 230 – FUEL/AIR OPERATION, TEST & ADJUSTMENTS
05 – Component Location
10 – Theory of Operation
15 – Diagnosis, Tests, and Adjustments
John Deere 5220 5320 5420 5520 Tractor Operation Manual
SECTION 240 – ELECTRICAL SYSTEM OPERATION, TESTS & ADJUSTMENTS
05 – Component Location
10 – Theory of Operation
15 – Diagnosis, Tests, and Adjustments
20 – Wiring Schematics
SECTION 250 – POWER TRAIN OPERATION, TESTS & ADJUSTMENTS
05 – Component Location – Collar Shift/SyncShuttle Transmission
06 – Component Location – PowrReverser Transmission
10 – Theory of Operation – Collar Shift/SyncShuttle Transmission
11 – Theory of Operation – PowrReverser Transmission
15 – Diagnosis, Tests, and Adjustments – CS/SS Transmission
16 – Diagnosis, Tests, and Adjustments – PowrReverser
SECTION 260 – STEERING AND BRAKE OPERATION, TESTS & ADJUSTMENTS
05 – Component Location
10 – Theory of Operation
15 – Diagnosis, Tests, and Adjustments
SECTION 270 – HYDRAULIC SYSTEM OPERATION, TESTS & ADJUSTMENTS
05 – Component Location
10 – Theory of Operation
15 – Diagnosis
16 – Hydraulic Tests – Without SCV
17 – Hydraulic Tests – With SCV
18 – Hydraulic Tests – All
19 – Adjustments
20 – Hydraulic Schematics
SECTION 290 – OPERATOR STATION
05 – Component Location
10 – Theory of Operation
15 – Diagnosis, Tests, and Adjustments
SECTION 299 – DEALER FABRICATED TOOLS
00 – Dealer Fabricated Tools