Case WX145 WX165 WX185 Wheeled Excavators Operators Manual
Case Wx145 Wx165 Wx185 SERIES 2 TIER 3
This Is The Complete Operators Manual For The Case Wx145 / Wx165 / Wx185 Wheeled Excavators
Covers The Following Models:
Wx145
Wx165
Wx185
This Manual Describes Procedures For Operation, Handling, Lubrication, Maintenance, Checking, And Adjustment. It Will Help The Operator Or Anyone Realize Peak Performance Through Effective, Economical And Safe Machine Operation And Maintenance.
Operators Manual Contains:
1 – Introduction, Safety, Plates And Decals
2 – Controls And Instruments
3 – Operating The Machine
4 – Supplies And Service Chart
5 – Storage
6 – Accessories
7 – Data And Technical Specifications
8 – Alphabetical Index
Attachment 1 – Ec Declaration Of Conformity
Operating Case Excavators (WX145 / WX165 / WX185):
Pre-Operation Inspection:
Check the machine’s fluid levels (fuel, engine oil, hydraulic oil, etc.).
Inspect the undercarriage, tracks, and tires for any damage or wear.
Ensure all safety features, like lights and alarms, are functioning properly.
Cabin Entry and Setup:
Enter the operator’s cabin using the designated steps and handles.
Adjust the seat, mirrors, and controls for optimal visibility and comfort.
Fasten your seatbelt.
Engine Start:
Turn the ignition key to the “on” position.
Engage the safety lockout mechanisms as required by the machine.
Start the engine according to the manufacturer’s instructions.
Machine Operation:
Familiarize yourself with the control layout, including joysticks and pedals.
Use the throttle to control engine speed.
Use the joysticks to control the boom, arm, and bucket movements.
Be gentle with control inputs to avoid jerky movements.
Moving the Machine:
Use the left-hand joystick to control the tracks (if applicable).
Push both joysticks forward to move forward, pull back to move backward.
Use the right-hand joystick to control the direction of the boom and bucket.
Excavation and Digging:
Lower the bucket or attachment to the ground.
Use the joysticks to control the boom and arm to dig into the material.
Control the bucket curl to scoop and lift material.
Case WX145 WX165 WX185 Wheeled Excavators Operators Manual
Swing Operation:
Use the joystick or pedals to control the swing of the machine.
Be cautious of your surroundings and other workers while swinging the excavator.
Dumping Material:
Position the bucket over the desired dumping area.
Use the controls to carefully tilt and dump the bucket’s contents.
Safety Precautions:
Always be aware of your surroundings and other workers on the job site.
Keep a safe distance from trenches, edges, and unstable ground.
Communicate with ground personnel using hand signals or radios.
Shutdown and Maintenance:
Park the machine on level ground.
Lower all attachments to the ground and engage the parking brake.
Turn off the engine and remove the key.
Perform routine maintenance as outlined in the operator’s manual.
